PCB Impedance

Beta version

Design a single trace or a differential pair and calculate its impedance.

PCB trace impedance calculator

Geometry, impedance, 2D field and transmission. Existing advanced parameters are preserved.

Line geometry

Z0 = 51.108 Ω
Analytical formula
Material source · Typical Dk / Df · 10 GHz · Bereskin stripline

Dk 4.2 · Df 0.0125 · 10 GHz
Starting values depend on construction and frequency. Dk and Df stay constant over the simulated band.

WHT
W 300 µmH 180 µmT 35 µm
Validation of this model

2D solver, not the quick formula: three Polar widths, about 0.2% to 0.5% on these cases.

These are individual reference cases. They do not bound the accuracy of the entered geometry.

Copper: Hammerstad–Jensen smooth-copper formula above three skin depths.

Read references and limitations

2D electrostatic solver

Find a dimension with the 2D solver

Transmission versus frequency

Estimated matched-line transmission: 20 log₁₀|S₂₁| = −loss (dB). Dielectric and copper contributions are shown separately, and their sum gives the total. Smooth copper is modeled above three skin depths. Discontinuities, roughness and dispersion are excluded.

Run the 2D solver for coupled or layered geometries. The entered Df applies where no Df was imported. The 2D copper estimate is mesh-sensitive.

  • Dielectric
  • Copper
  • Total
00.1-0.7322.575-1.4635.05-2.1957.525-2.92610dBGHz

Hover or drag; use ← / →, Home / End on the keyboard. The pointer snaps to the 51 calculated frequencies, shared by A and B.

Last valid point of each curve
LineComponentGHzTransmission (dB)Method
ADielectric10-1.827Formula
ACopper10-1.099Hammerstad–Jensen
ATotal10-2.926Hammerstad–Jensen
Loss equations (Qucs)